• Stop the Mop: Telltale Signs that...

Stop the Mop: Telltale Signs that “Clean” Floors are Actually Dirty

By Amy Milshtein

Stop the Mop: Telltale Signs that “Clean” Floors are Actually Dirty

Hard-surface floors are designed to take a beating and still look good. That’s why you find them in lobbies, hallways, kitchens, restrooms and other heavy-use areas. Materials like ceramic tile, vinyl, laminate, concrete and terrazzo make sense. They hold up and are easy to maintain; just sweep, mop, air dry and they look good for years, right?

 

Well, no.

 

Old fashioned cleaning tools like mops don’t actually clean. They leave hard floors looking worn and dingy. More importantly, they don’t remove soils and pathogens completely. Is it time to stop the mop at your facility? Here’s some telltale signs.

 

What Stinks?

Have you ever walked into a just-cleaned restroom that smelled less than fresh? Blame your mop. Restrooms are typically floored with tile and grout. This on-trend combination looks good and the tile holds up to heavy wear. But grout is porous and absorbs and holds on to liquids. Mopping only makes the problem worse. The tiles act like a squeegee, drawing contaminate-filled water from the mop strings and depositing it on the grout. And there the urine-and-pathogen-filled sludge sits, stinking up your restroom and encouraging bacterial growth.

 

Tile and grout is not just for restrooms. The combination is found on kitchen, lobby and restaurant floors too. Designers love the look and are specifying smaller and smaller tiles to add style. While charming, this trend requires more grout per square foot which potentially leads to more bad smells.

 

Streaks and Five O’clock Shadow

A brand-new, hard surface floor looks bright and shiny. But if the surface darkens over time or starts to look streaky don’t take blame the material. Blame the mop. Mops leave streaks for many reasons: using too much cleaning solution, using too little cleaning solution, using the wrong cleaning solution or not changing the cleaning solution as it gets dirty.

 

That last one is a bit misleading. Cleaning solution gets dirty as soon as mopping begins and gets progressively dirtier as the job continues. Some facilities try to combat the problem by using the double bucket method, where one bucket holds solution and the other has a clean rinse water. While this alleviates the problem a bit, it’s still not enough. Soils are not fully removed from the mop and are passed from floor to rinse to cleaning solution and back to the floor.  

 

For more visual proof walk into a freshly mopped room and look at the baseboards. Is there a line of dirt and grit that extends up the wall? That’s five o’clock shadow, left by dirty water that splashed from the mop.

 

Do you want really clean interiors that look and smell great? Click here for ideas and stop the mop. 

  • Share
  • Twitter
  • LinkedIn
  • Share via Email
  • Facebook
  • Google+

Related Topics

Related Products

  • Kaivac 1750 Manual (Serial Numbers 13409+)KaiVac 1750 No-Touch Cleaning® System

    When it comes to restrooms and other heavily soiled areas, nothing beats Spray-and-Vac cleaning. Kaivac’s No-Touch Cleaning systems are built for extreme soil removal, empowering workers to clean hygienically without touching contaminated surfaces. Plus, it cuts labor, chemical and equipment costs. Achieving great, consistent results is easy with these patented systems. Simply apply automatically diluted cleaning solution to fixtures and floors in a low pressure fan spray, and then rinse surfaces and floors with always-fresh, clean water. The built-in power of the indoor pressure washer flushes soils out of grout lines and tight places that mops can’t reach. Finally, just vacuum the floor dry -- completely removing soils, moisture and contaminants from all surfaces, grout lines and crevices, leaving the floor virtually dry and soil free. The Kaivac 1750 is perfect for areas large and small. It boasts a 17 gallon fresh water and a 17 gallon recovery tank. The system is powered by a 500 p.s.i. pump and a powerful 3-stage wet/dry vacuum.

  • Kaivac 1750 Manual (Serial Numbers 13409+)Gatling Gun™ Grouter

    Low-Cost high-speed rotary nozzle delivers the power of a truck mount on a portable 500 psi Kaivac No-Touch Cleaning system.

  • Kaivac 1750 Manual (Serial Numbers 13409+)OmniFlex™ Dispense-and-Vac

    The OmniFlex Dispense-and-Vac system offers a simple, fast approach to cleaner, safer floors. Its extreme cleaning capabilities achieve hygienic results in even the heaviest soil and grease conditions. In fact, like most Kaivac systems, it's up to 60 times better at removing soil and contaminants than mopping. That makes the Dispense-and-Vac is perfect for food service establishments, industrial facilities, light duty public restrooms and much more. Just apply fresh cleaning solution to the floor, spread and lightly brush into grout lines, and then completely vacuum away all soils and liquid, leaving floors really clean and bone dry. It's perfect for daily cleaning and degreasing of commercial floors. It's also great for applying and removing stripper on finished floors. The process is radically better, faster and safer than cleaning with a mop.

    Click here to see the compact Space Saver Dispense-and-Vac model

  • Kaivac 1750 Manual (Serial Numbers 13409+)OmniFlex™ AutoVac™ Battery

    The OmniFlex AutoVac is an automated high performance floor cleaning machine that's three-four times faster than a mop, but instead of spreading soils, it actually removes them completely from the floor surface. Even more impressive, it cleans as well and as fast as a traditional walk-behind or ride-on auto scrubber at a fraction of the cost! A really simple approach to cleaner, safer floors, this system is perfect for high speed cleaning of hard surface areas, such as entranceways, hallways, cafeterias, lobbies, warehouses, fitness areas and more. It rivals the performance of an auto scrubber without the added cost or complexity, making it perfect for building service contractors and facility managers alike.

  • Kaivac 1750 Manual (Serial Numbers 13409+)OmniFlex™ SUV™

    The OmniFlex™ SUV™ is the one cleaning system for all your hard surface floor cleaning needs. SUV is an all-in-one multipurpose platform that replaces and outperforms mops and buckets, janitor's carts, wet vacuums, dust mops, and in some cases, even autoscrubbers. The ultimate in Crossover Cleaning, it combines high speed push-behind cleaning for large areas with the precision and flexibility of a vacuum wand for smaller areas or grouted floors. The result is a compact cleaning cart that can tackle any hard flooring challenge thrown its way. Possibly the hardest working cleaning system around, the SUV achieves amazing results in much less time. Plus, you'll save a lot of money in the process. It's the first practical whole-building cleaning cart replacement ever developed.

© 2001 - 2017 Kaivac, Inc. Privacy Policy
Close